Stik på din computer.
Links
Elektronik
Programmer
Formler
Om dsel.dk
| Pin | Name | Description |
|---|---|---|
| 1 | +5v | Power |
| 2 | n/c | Not connected |
| 3 | IRRX | IR Module data received |
| 4 | GND | System GND |
| 5 | IRTX | IR Module data transmit |
Pinout på game porten. 15 PIN D-SUB FEMALE på computeren.
15 PIN D-SUB MALE på joystick kabel.
| Pin | Name | Dir | Description |
|---|---|---|---|
| 1 | +5V | OUT | +5 VDC |
| 2 | /B1 | IN | Button 1 |
| 3 | X1 | IN | Joystick 1 - X |
| 4 | GND | ------ | Ground |
| 5 | GND | ------ | Ground |
| 6 | Y1 | IN | Joystick 1 - Y |
| 7 | /B2 | IN | Button 2 |
| 8 | +5V | OUT | +5 VDC |
| 9 | +5V | OUT | +5 VDC |
| 10 | /B4 | IN | Button 4 |
| 11 | X2 | IN | Joystick 2 - X |
| 12 | GND | ------ | Ground |
| 13 | Y2 | IN | Joystick 2 - Y |
| 14 | /B3 | IN | Button 3 |
| 15 | +5V | OUT | +5 VDC |
Seriel porten "RS232"
| D-sub25 | D-sub9 | I/O | DCE | Deskrivelse | |
| 1 | X | AA | Protective Ground | ||
| 2 | 3 | I | TXD | BA | Transmitted Data |
| 3 | 2 | O | RXD | BB | Received Data |
| 4 | 7 | I | RTS | CA | Request To Send |
| 5 | 8 | O | CTS | CB | Clear To Send> |
| 6 | 6 | O | DSR | CC | Data Set Ready |
| 7 | 5 | X | GND | AB | >Signal Ground |
| 8 | 1 | O | CD | CF | Received Line Signal Detector |
| 9 | X | -- | Reserved for data set testing | ||
| 10 | X | -- | Reserved for data set testing | ||
| 11 | X | Unassigned | |||
| 12 | O | SCF | Secndry Rcvd Line Signl Detctr | ||
| 13 | O | SCB | Secondary Clear to Send | ||
| 14 | I | SBA | Secondary Transmitted Data | ||
| 15 | O | DB | Transmisn Signl Elemnt Timng | ||
| 16 | O | SBB | Secondary Received Data | ||
| 17 | O | DD | Receiver Signal Element Timing | ||
| 18 | X | Unassigned | |||
| 19 | I | SVA | Secondary Request to Send | ||
| 20 | 4 | I | DTR | CD | Data Terminal Ready |
| 21 | O | CG | Signal Quality Detector | ||
| 22 | 9 | O | CE | Ring Indicator | |
| 23 | I/O | CH/CI | Data Signal Rate Selector | ||
| 24 | I | DA | Transmit Signal Element Timing | ||
| 25 | X | Unassigned |
Parallel port.
| Pin | SPP Signal | ECP Signal | IN/OUT | Function |
| 1 | Strobe | HostCLK | Out | A low on this line indicates, that there is valid data at the host. When this pin is de-asserted, the +ve clock edge should be used to shift the data into the device. |
| 2 | data0 | data0 | IN/OUT | Address, Data or RLE Data Bit 0 |
| 3 | data1 | data1 | IN/OUT | Address, Data or RLE Data Bit 1 |
| 4 | data2 | data2 | IN/OUT | Address, Data or RLE Data Bit 2 |
| 5 | data3 | data3 | IN/OUT | Address, Data or RLE Data Bit 3 |
| 6 | data4 | data4 | IN/OUT | Address, Data or RLE Data Bit 4 |
| 7 | data5 | data5 | IN/OUT | Address, Data or RLE Data Bit 5 |
| 8 | data6 | data6 | IN/OUT | Address, Data or RLE Data Bit 6 |
| 9 | data7 | data7 | IN/OUT | Address, Data or RLE Data Bit 7 |
| 10 | Ack | PeriphCLK | In | A low on this line indicates, that there is valid data at the Device. When this pin is de-asserted, the +ve clock edge should be used to shift the data into the Host. |
| 11 | Busy | PeriphAck | In | When in reverse direction a HIGH indicates Data, while a LOW indicates a Command Cycle. In forward direction, functions as PeriphAck. |
| 12 | Paper Out / End | nAckReverse | In | When Low, Device acknowledges Reverse Request. |
| 13 | Select | X-Flag | In | Extensibility Flag |
| 14 | Auto Linefeed | Host Ack | Out | When in forward direction a HIGH indicates Data, while a LOW indicates a Command Cycle. In reverse direction, functions as HostAck. |
| 15 | Error / Fault | PeriphRequest | In | A LOW set by the device indicates reverse data is available |
| 16 | Initialize | nReverseRequest | Out | A LOW indicates data is in reverse direction |
| 17 | Select Printer | 1284 Active | Out | A HIGH indicates Host is in 1284 Transfer Mode. Taken low to terminate. |
| 18 | GND | GND | ------ | Signal Ground |
| 19 | GND | GND | ------ | Signal Ground |
| 20 | GND | GND | ------ | Signal Ground |
| 21 | GND | GND | ------ | Signal Ground |
| 22 | GND | GND | ------ | Signal Ground |
| 23 | GND | GND | ------ | Signal Ground |
| 24 | GND | GND | ------ | Signal Ground |
| 25 | GND | GND | ------ | Signal Ground |
Tilbage Top